USER CODE INSTRUCTIONS:
Every code in your system is assigned to a two digit “user number”. This is how the system tracks the
codes. The “master” code is reserved for user 02. The additional user numbers start at 03, and continue
up to 49. Please note user 01 is reserved as the installer code for testing purposes, and cannot be
changed. All codes must be four digits. The master code is the only code allowed to modify codes in the
system.
MASTER CODE CHANGE PROCEDURE:
Perform the following sequence at your keypad to change the system master code:
Current Master Code + 8 + 02 + New Master Code + New Master Code Again
You should hear a chime to confirm the new code has been accepted.
ADD OR CHANGE ONE OF THE ADDITIONAL USERS:
First, decide the user number the code will be assigned to, or the current user number of the code you
want to change. Then perform the following procedure at the keypad:
Master Code + 8 + User Number (03-49) + New User Code
You should hear a chime to confirm the new code has been accepted.
DELETE A CURRENT CODE:
You will need to know the user number the code is assigned to before it can be deleted. You do not
need to know the code itself, just the user number.
Perform the following sequence at your keypad to delete a code:
Master Code + 8 + User Number (03-49) + # button + 0
You should hear a chime to confirm the code has been removed from the system.